Pali e torrifaro per illuminazione

Poles and high masts for lighting

Columnas de alumbrado y torres de iluminacioòn

Mâts et Candélabres Fonctionnels

وأعمدةللإضاءة

Datemi un punto d’appoggio e … illuminerò il mondo 

invisible
SEMAPHORE POLES

SEMAPHORE POLES

Semaphore poles with straight octagonal section, made from S355 JR – UNI EN 10025 , folded shet steel welded lenghtwise in accordance with the process certified by the “Italian institute of welding”. The projection arm has a circular section and it is fixed to the pole by a self centring ring and bolts.

Hot dip galvanized in accordance with UNI EN IS 1461 and supplied with cable entry slots, earthing devices and door opening.

Dimensions tolerances:         UNI EN 40-2

Reference for calculation:      D.M. 17 January 2018 UPDATE OF TECHNICAL STANDARDS FOR CONSTRUCTIONS IN R.C. AND METALLIC

– CIRCULAR N ° 7 21/01/19 INSTRUCTIONS FOR THE APPLICATION OF THE UPDATE OF NTC 17-01-18

 

 

The traffic light poles can also be supplied with a base plate for fixing to the plinth by means of anchor bolts

Straight Semaphore Column

 

 

POLES FOR PEDESTRIAN CROSSING



The poles for pedestrian crossings consist of a vertical octagonal part obtained by bending and longitudinal welding of trapezoids in S355JR steel sheet (compliant with the UNI EN 10025 standard) and a horizontal part with a circular section. The junction between the two structures takes place through a series of bolts.

The welds are performed with a procedure approved by the Italian Welding Institute, with the help of qualified personnel.

The poles are hot-dip galvanized by immersion in a zinc bath in compliance with the UNI EN ISO 1461 standard.

On customer’s request, powder coating is available according to the Standards UNI EN ISO 2409, classe 1-2808 – DIN 53132-ASTM B117.

TELESCOPIC POLES
N.C.M. includes a line of telescopic poles, the use of which is recommended on high-speed roads, sports facilities, large areas and places where the environmental impact is minimized.
The telescopic poles, ranging in height from 5 to 20 meters, are characterized by pneumatic movement.
These products differ from traditional lighting poles on the basis of the peculiarities listed below:
  • The maintenance of the lighting body takes place on the ground
  • The fact that use of baskets that engage the roadway is not necessary
  • The handling of the pole does not require special equipment, in addition to those supplied by N.C.M.

Our tecnical staff is available to the customer to propose the most suitable solution to meet the various needs.                                                              The posts are hot-dip galvanized by immersion in a zinc bath in compliance with the Standard UNI EN ISO 1461.

On customer’s request, powder coating is available according to the Standards UNI EN ISO 2409, classe 1-2808 – DIN 53132-ASTM B117.

Esteso h=m 8
ritratto h=m 2

 

 

POLES FOR ADVERTISING SIGNS

Advertising sign poles are widely used within company areas, or along the road near them.

They are also an important promotional tool thanks to the identification function that they transmit indelibly towards the viewer, as real advertising tools.

They are made with poles with a polygonal section and can be equipped with lighting devices, integrating the advertising function with the lighting one.

They are customized according to the specific needs of the customer.

The posts are hot-dip galvanized by immersion in a zinc bath in compliance with the UNI EN ISO 1461 standard.

On customer request, powder coating is available according to UNI EN ISO 2409, class 1-2808 – DIN 53132-ASTM B117 Standards.

 

POLES FOR ROAD SIGNS AND SPORT SIGNS.

Road sign poles are widely used along roads, highways or near them.

They are made with poles with a polygonal section and can be customized according to the specific needs of the customer.

The posts are hot-dip galvanized by immersion in a zinc bath in compliance with the UNI EN ISO 1461 standard.

On customer request, powder coating is available according to UNI EN ISO 2409, class 1-2808 – DIN 53132-ASTM B117 Standards.

N.C.M. S.r.l.
Sede legale: Via Bramante, 24 – 20020 MAGNAGO (MI) – Italy – Uffici e magazzino: Via Marconi, 103 – 20020 MAGNAGO (MI) – Italy
Tel. +39 0331 657001 (ric. aut.) – Fax +39 0331 305845
Cap. sociale 90.000,00 € – Cod. Fiscale e Part. IVA IT05864500151 – R.E.A. Milano 1043027
N. Meccanografico MI 051181 – Registro imprese di Milano 05864500151 – e-mail: ncm@ncm.it